Русский
Slab CO2 laser “RLS-1000”
“RLS-1000” can be used for fast cutting, drilling, scribing the dielectric materials such as: wood, plywood, plastics, leather, ceramic etc.; and for cutting and welding of thin metal sheets, and also for marking and engraving of the surfaces.
“RLS-1000” – RF-excited (81,36 MHz) slab laser, operating in sealed-off mode up to 5000 hours. There is a possibility to refill the laser gas.
“RLS-1000” presents itself a combination of two lasers “RLS-500”. The spatial filter, power meter and red beam for aiming are included in the optical beam shaping scheme. Laser head, two solid-state RF generators and AC/DC power supply are jointed in compact monoblock.
“RLS-1000” – RF-excited (81,36 MHz) slab laser, operating in sealed-off mode up to 5000 hours. There is a possibility to refill the laser gas.
“RLS-1000” presents itself a combination of two lasers “RLS-500”. The spatial filter, power meter and red beam for aiming are included in the optical beam shaping scheme. Laser head, two solid-state RF generators and AC/DC power supply are jointed in compact monoblock.
Specification of laser "RLS-1000"
| Output power | 1000 W (guaranteed) |
| Average power range | 10 – 1100 W |
| Operation modes | CW and pulse repetitive |
| Frequency | 10 Hz-10 kHz |
| Duty cycle | 1-100 (%) |
| Wavelength | 10.2-10.8 micron |
| Mode | TEM00 (96%) |
| Beam quality | M2≤1.2 (K≥0.8) |
| Beam diameter (at the level of 99% power) | 20 ± 2 mm. |
| Beam divergence (at the level of 86% of total power) |
1,3 mrad. |
| Polarization | Linear 99.5 % |
| Power stability (24 hours) | ±5 % |
| Pointing stability | ±0.2mrad |
| Technical requirements | |
| Temperature of cooling water | 20o,C |
| Flow rate | 20 L/min. |
| Electric AC mains | 3 х 380 VAC , 20 kVA |
| Dimensions L х W х H [mm] and weight (kilogram) | |
| Laser head with RF and DC power supply | 1650 х 350 х 350 / 105kg. |